Snow Plow Preparation List , YES Before The Storm

Everybody may have a different way to check their snowplow Equipment before
the storm but this works for me. The first thing I do is what is called a
Pre-trip inspection just like you would on a tractor trailer.

Lift the hood on your plow truck , check the engine oil, power steering fluids, windshield washer fluids , and battery connections are tight, check the belts be sure they are not cracked, check the coolant level, (with the truck cold), check the brake fluid and If low it either means your pads need to be changed, or there is a leak. The fluid went some where! Look around in the motor compartment for any loose wires, be sure they are not touching or rubbing through anywhere. OK, now close the hood and proceed to the rest of the inspection.

Get in your snowplow truck check and see that the horn works, the wiper works the heat works, put the truck in 4wd and drive forward a few feet you should feel the difference of resistance when you turn the wheel and drive forward . Then disengage the 4wd and put the transmission back into park. Check that the parking brake is working and releases, check that the brakes are working.

Now check the lights, put on the low beam headlights, parking lights, start at the drivers door out side of your vehicle and walk counter clockwise around your plow truck check the tire lugs, tire pressures, grab the mirrors make sure they are not loose check that the lights are working. Now go back and check high beams and left, right signal lights and brake lights. When you are done with this now we can go on to checking the plow out.

We can now begin to check out the plow. You want to make sure everything is working before you go to work. You want to make sure everything is working fine and not faulty when you need to start snowplowing.
Time is money and we do not want you to have any break downs if we can help it.

Start the vehicle and raise and lower the plow a few times
Check the controls are not loose and cycle the plow with the controls
When you are doing this watch the amp gauge for not over excessive amp draw down in the system.
Raise the plow up and leave it up for a few minutes to make sure it does not drift down
Check the snowplow high beams and low beams are working and adjusted right.
Check the turn signal lights are working and not loose
With the plow down get out and inspect the chain is not worn
Check around all hydraulic cylinders for leaks or dents in the cylinders
Check the snowplow hoses and hose connections
Check the center pivot of the plow for play
Check the plow frame bolts are tight and not loose
Check for any cracks on the welds of the plow
Inspect the snowplow cutting edge, shoes and springs
Look at the snow plow pins and the plow retainer rings

OK now that you inspected your snowplow. Let’s go over a few things you should have
in the truck with you, flashlight, gloves, extra plow pins, extra hose and quick connectors, hydraulic fluid,
Box of fuses, a relay for you plow, Electrical tape, 2 cans of fix a flat, and road flairs.

I have used this list for over 20 years and it has saved me many times. I hope it saves you Happy plowing From Edgeolite.com

Click here for more information

http://edgeolite.com/more-info.htm

http://edgeolite.blogspot.com/

Canadian Snow fall breeds Innovation

After spending time researching different styles and shapes of snowplows used on todays
roadways, I decided to do on article on this snow plow product. There are actually many different styles of snow plows made for different geographic areas within North America

However, after coming across a company in CANADA I felt compelled to share with you what I found and why I found it important to report on it. As you know, when we you are out pushing snow moving the majority doesn’t ever seem the same amount of time it takes to d o the final clean up. I do not know why exactly but I think it has to do with detail. Anyway, I found a snow plow manufactuer in Canada called SNO-GATE that makes a plow- gate , that can turn a plow from a regular blade to a additional box plow.

This concept does not only apply to straight blades but also to loader buckets, and ATV plows. The plows are made from heat treated steel. The way it is designed it will hold more snow than you normal plow but then fold back to the original size if needed. This concept, is a different spin then the new v plows concept.

I feel that the main design for these Canadian snowplows is prmiraly for commercial acount and can speed up your clean up time all with the same snowplow. These snowplow gates can be fitted on any size snow plow blade or snow bucket. Once you do the installation they are easy to remove if needed.

It also seems this Canadian snowplow manufacture also offers a 100% factory guarantee on there product for 3 years. According to some projections, the additions on your snowplow can increase the moving capacity by 3 times the amount you are currently plowing. This concept I believe is worth looking at for several reason including eliminating the need for different blades, snow buckets and additional trucks. After trial-testing various product designs and enhancements, the designer, has accomplished his two goals - a design that can be mated with currently existing buckets and at the same time increase the bucket's efficiency

For more information on this great product ,JOIN the Free newsletter NOW Click here

Snowplow For Sale -What To Look For

So you are looking for a used snowplow truck to buy? Hey what the hell it’s less
then a new snowplow truck. Is it really? I guess that all depends on what you are doing and what you

are looking at to buy. The first thing I would have to think about if I was looking to buy a used snowplow truck, is what am I going to do with it? Will the snowplow truck be used for just my driveway? Will it be used for a residential snowplow account, mainly driveway work?. Or are you subcontracted by a municipality for snow removal on major road ways.

The answer to this questions is of major importants. OK, for the first application if your plowing just you own driveway an older snowplow truck that is being retired is fine, as long as all the major components work proper like the brakes, 4 wd, and the snowplow it self. If you are doing residential work you want
thoroughly check out the snowplow truck prior to buying because now that truck is your reputation.

Homeowners do not like to be told their driveway won’t be ready for them to go to work because your truck broke down. So when you are looking for a snowplow truck for sale you want to check out all the major components. Also run the plow makes sure everything works as it is suppose to. The other thing to keep in mind the brand of the truck, yes that’s right. You do not want to buy a snowplow truck that is
a special model because you will feel the pain when you need to get a part for it and you have to wait a few days instead of being in stock. Remember the auto parts stores stock what sells best not what doesn’t.

The next thing to consider is if you are subcontracted by a municipality, this is usually being paid be the hour for your snowplow truck and you. Remember, this is not start and stop type of plowing this is usually continuous plowing on town road ways. They will usually give you a certain section in your town to plow. When you are looking at snowplows for sale , you again want to keep this in mind.

You do not want a six foot snowplow, you will want a truck with an 8’ foot snowplow blade and with a rubber deflector. Good luck trying to plow a roadway with out a snowplow deflector on it at 30 mph or better. If you are looking at snowplow for sale this is what to look at, and do, pre-trip the truck first of all and that should cover all lights , tires ect. Then get on your creeper and start looking underneath check drive shafts, brake lines, cooler lines, wiring harness, fuel tank straps, exhaust and exhaust hangers, and check for fluid leaks. DO this inspection with the engine cold and then at operating temperature.

After dong that then cycle the plow many times not just once or twice why?, because, it takes a few cycles to warm up the hydraulic oil in the the snowplows system and then that’s usually when the seals start to leak, and need to be replaced. After the inspection, if everything seems up to snuff and in good working order then make the seller a fair offer. Try not to wait to long, because if the truck is in good shape and everything is fine someone will buy it. Time is money you do no want to spend the plow season looking for a truck especially if you found what you are looking for. I will come out with more on this topic on our snowplow Blog in the next few weeks in the mean, time happy hunting.
Tags: snowplow for sale, snowplows for sales ,snow plow trucks for sale, snow removal equipment for sale http://www.edgeolite.com/snowplow-for-sale.html